YOUSU Waterwash LCD 3D Printer Resin, 405nm UV Curing photopolymer Resin for LCD 3D Printing, High Resolution & Low Odor
YOUSU Waterwash LCD 3D Printer Resin, 405nm UV Curing photopolymer Resin for LCD 3D Printing, High Resolution & Low Odor
Couldn't load pickup availability
CS3D Water Washable Resin: High Precision and Low Shrinkage
Specially designed for LCD/DLP 3D printersUnleash Your Printing Potential
Experience the ultimate in high-resolution printing performance with CS3D Water Washable Resin. Our revolutionary formula allows you to achieve unparalleled detail, printing micro holes and small pillars with ease. Say goodbye to blurry prints and hello to stunningly precise creations.
Efficiency Meets Convenience
With CS3D Water Washable Resin, you can enjoy a seamless printing process from start to finish. Our low shrinkage rate ensures minimal material waste, saving you money on every order. Plus, clean up is a breeze – simply use water to effortlessly remove excess resin. No harsh chemicals required.
Strength, Durability, and Safety Combined
Our resin not only offers excellent fluidity and great stability, but it also boasts impressive strength and durability. Your prints will withstand the test of time, ensuring they look as good as the day they were created. And with our safe leakproof bottle, you can rest easy knowing your workspace will stay clean and mess-free.
|
Resin Type: |
Standard Resin |
|
Hardness: |
95D |
|
Volume Shrinkage: |
<1% |
|
Line Shrinkage: |
<1% |
|
Density: |
1.07628 g/cm3 |
|
Flexure Strength: |
75Mpa |
|
Extension Strength: |
42MP |
|
Elongation at Break: |
7% |
|
Way to Rinse: |
Clean with IPA |
|
Suitable for: |
LCD/DLP 3D Printer |
|
Application: |
General modeling & Industrial prototype proofing |
Storage method
1. Please keep the resin at room temperature (15 - 35 degrees Celsius) and sealed, the lower the temperature, the higher the viscosity of the resin.
2. Keep away from light.
Usage
1. Shake well before use, do not use the resin in places where there is a lot of sunlight.
2. Wear gloves before use and avoid direct contact with the skin, keep the room well ventilated.
3. Clean models under water with a brush and then dry with hairdryer, before curing with a UV curing light, or just the sun.
